Contact Us

Shandong Xinke Powder Coating Co.,Ltd

Add: Lebushan Economic Development Zone, Weicheng District, Weifang, Shandong, China

General Manager: Xuefeng Zhao

Tel: 86-536-8673066

Mobile: +86-13370851888

Fax: 86-536-8673166


Sales Magager: Theo Yu





Home > News > Content

Outdoor Metal Fluorocarbon Powder Coating

Outdoor Metal Fluorocarbon Powder Coating Product Detail

Basic Info

  • Usage:Powder Coating

  • Color:Sliver

  • Appearance:Powder

  • Method:Spray

  • Components:Film Forming Matter

  • Main Raw Material:Polyester

  • Level:Finish Coat

  • Certification:ISO14001, RoHS, ISO9001, Reach

  • Substrate:Metal

  • Expiration Date:6 Months

  • Formation Mechanism:Non Conversion Type

  • Packaging:Plastic Drum

  • Package:Carton Lined with PE Bag

  • Specification:25kg per carton

  • Origin:China

Outdoor Metal Fluorocarbon Powder Coating Product Description

Product Name : Outdoor Metal Fluorocarbon Powder Coating

Outdoor Metal Fluorocarbon Powder Coating Product Introduction

This high-end product is mainly made from Fluorocarbon Resin and super weathering Polyester Resin, which can be applied to the coating of high-performance architectue, Al-alloy Curtain wall, aluminum profile, al-alloy door & window, steel structure, Marine Accessories, auto parts and so on.


1)Excellent weather resistance
2)High Hardness and Durable film
3) The properties can reach or surpass the AAMA2604-02/AMMA2605-02 standard.

1) Architectural Finish
2) Steel Structure
3) Marine Accessories
4) Al-alloy Curtain wall

Outdoor Metal Fluorocarbon Powder Coating Technical Data
                                       Powder Technical Specifications

Film Appearance  VisuallyLoose And Uniform Color
Granularity ASTMD5861D (50) : 30μ - 35μ
Specific Gravity ISO8130-21.30 - 1.60
Leveling Property 
(220 ± 2 oC )
GB / 6554-8617mm - 30mm
Gel Time
(220 ± 2 oC )
GB / 16995 -9760S - 360S

                                                 Film Technical Specification

Film AppearanceVisuallySmooth , slight orange peels texture is allowed
Color DifferenceGIE1976(L*a * b )Agree ΔE
Gloss (60° )GB / T9754-93Agree ΔE
Impact GB/T1732-93≥
Pencil HardnessGB/T6739-96≥2H
Adhesion (QFH Test )GB/T9286-980 Class
Salt Fog ResistanceGB/T1771-931000h No Visual Change
Humidity ResistanceGB/T1740-791000h No Visual Change
Weather Resistance ( 5 Years / 10 Years Florida exposure test )AAMA2604-02

Outdoor Metal Fluorocarbon Powder Coating Painting Process

Substrate Requirement: Remove the oil & rust and apply to the phosphate /chromates treatment. 
Spraying Device: Electrostatic Spray Gun
Spray Gun Voltage: 60-80KV
Powder Supply Pressure: 0.05-0.1MP
Spraying Rate: 100-200g/min
Spraying Distance: 150-300mm
Curing Temperature: 180-200oC ( The temperature of working surface)
Curing Time: 10-15min
Coating Thickness: 70-90 um


1. Carton lined with PE bag
2. Net weight 25kg per carton
3. Carton size: 37.8cm*27.1cm*36.3cm
4. A 20ft container could load 15tons

Outdoor Metal Fluorocarbon Powder Coating Storage Condition

Temperature: ≤35oC
Humidity Conditions: Dry, Cool and Ventilated
Storing Requirement: Cannot be piled up over 4 cartons; 
Seal the PE bag after using; 
Away from VOC, fire and heat; 
Validity: 6 months (If the parameters are tested to be qualified, the product still can be used expire date)


1) To guarantee the coating ratio, the whole powder coating system (Spray gun, HV Control Cabinet, powder coating booth and conveyance chain) must has good grounding property. The ground wire should bury into the wet earth to conduct the static away, which could avoid poor absorption and coalescence of the metal powder cause by electrostatic shielding
2) The static gun should be overall cleaned up and the wash the conductive needle by alcohol every week so as to guarantee there will be stable high voltage on nozzle. 
3) The recycled powder should be used with new powder after sifting. The automatic recycle system has auto adding device, which should be checked regularly. 
4) The temperature of the oven should be examined periodically to guarantee the curing of the coating so as to achieve the best mechanical property. 

Coating Cleaning Methods

1)To use wet sponge or soft towel to remove the dust from substrate so as to avoid any scratch causes by dust. 
2) To put detergent into warm water, then clean dust and other dirt by towel with diluted detergent. Please do not use strong solvent and solvent with abrasive cleaner. 
3) To wash the substrate with clean water so as to remove the residual detergent. 
If there is grease or adhesive on the substrate, organic solve is needed for the cleaning. The following organic solvent can be selected for cleaning: Ethanol, turpentine, and isopropyl alcohol

Safety and Health

This powder coating is non-toxic and conforms to ROHS standard. But worker should wear dust respirator & goggles to avoid inhaling excess dust and also avoid long-term exposure to powder coating during process. 

Outdoor Metal Fluorocarbon Powder Coating.jpg