Contact Us

Shandong Xinke Powder Coating Co.,Ltd

Add: Lebushan Economic Development Zone, Weicheng District, Weifang, Shandong, China

General Manager: Xuefeng Zhao

Tel: 86-536-8673066

Mobile: +86-13370851888

Fax: 86-536-8673166


Sales Magager: Theo Yu





Home > News > Content

Thermosetting Powder Coating

Thermosetting Powder Coating Basic Info

  • Model NO.: Thermosetting Powder Coating

  • Appearance: High Solid

  • Level: Finish Coat

  • Certification: ISO9001, SGS

  • Components: Resin, Pigment, Curing Agents and Additives

  • Expiration Date: 1 Year

  • Color: Ral Colour Cards

  • Main Raw Material: Epoxy

Thermosetting Powder Coating Product Description

Thermosetting Powder Coating   

1.General introduction:
Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed  and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.

2.Thermosetting Powder Coating Feature:

1).The products are non-toxic, solvent-free and non-toxic volatile substances,there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws. 
2). Raw material utilization is high, the highest utilization rate even more than99%. 

3.Thermosetting Powder Coating Product series: 
  The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.
4.Thermosetting Powder Coating Powder physical properties: 
   Proportion : 1.2-1.8 (depending on the color and gloss ) .
   Particle size distribution: 100% less than 125 microns (more than 85%          
   between 60 to 90).


   Curing conditions:200°C,10 minutes.

5.Thermosetting Powder Coating Average coverage:

8-10m3/kg, the membrane is 60μm
(calculate by 100% utilization rate of powder coating).


   Carton packaging, lined with double polyethylene bag, net weight 20 kg.
7.Thermosetting Powder Coating Storage requirements:

   Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

8.Health and safety:
This product is non-toxic.
In the course of inhalation of dust should be avoided. The operators should wear  appropriate dust mask and glasses.

9.Thermosetting Powder Coating 
Coating performance

Coating performance
Test itemsInspection standardsTest indicators
High lightGlazed/Matte/Low light 
Impact resistanceISO6272GB/T1732-199350kg/cm40kg/cm
Cupping testISO1520GB/T9753-19888mm7mm
The adhesion (grid method)ISO2409GB/T9286-19980
Pencil HardnessASTMD3363GB/T6739-19961H-2H
Salt spray testISO7253GB/T1771-1991>500 hours
Damp heat testISO6270GB/T1740-1979>1000 hours
Heat resistance110°C/24 hours(white)Good gloss retention,E≤0.3-0.4
Florida weathering exposureISO2810South 45 °,12monsGloss retention≥50%
Artificial accelerated aging60°C/8hours + 50°C/4hours condensing,cycle for 500hoursGloss retention≥50%                         Color stability:E≤0.35
Annotate:1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.
 2.The above coating performance may be lower as shiny and slightly lower.

10.Why choose our products?

1). We have our own factory. The good quality and the competitive is the advantage of our company. 
2). The material we choose is always good and products always come out with high quality. 
3). A trial order or sample orders are welcomed. 
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world. 
5). We will do our best to service you all the time if you have the further question.

Thermosetting Powder Coating.jpg